|
|
|
|
|
|
Home / Buyer's Guide / Brochures / 2005 SSR / Specifications |
 |
 |
2005 SSR
Overview |
Standard/Optional |
Specifications |
Exterior Colors |
Interior Colors/Styles |
Available Wheels
|
Fuel Economy
| Engine and Transmission |
Estimated MPG
city/hwy.1 |
| LS2 6.0 Liter V8 with manual
transmission |
Not available at this time |
| LS2 6.0 Liter V8 with automatic
transmission |
Not available at this time |
- 1 Official EPA estimates not yet
available. Estimates based on GM testing.
Dimensions
 |
| NOTE: All dimensions shown are
inches/millimeters unless otherwise noted. |
| Exterior |
| Wheelbase |
116.0/2946 |
| Length |
191.4/4862 |
| Width |
78.6/1996 |
| Height |
64.2/1631 |
| Tread width – front |
64.1/1628 |
| Tread width – rear |
64.9/1648 |
| Interior |
| Headroom |
40.0/1016 |
| Legroom |
42.1/1069 |
| Shoulder room |
53.5/1359 |
| Hip room |
51.3/1303 |
| Cargo volume, approx. (cu.
ft./liters)1 |
22.5/637 |
- 1 Cargo and load capacity limited
by weight and distribution.
Capacities
| |
SSR |
| Seating |
2 passengers |
| Fuel tank capacity, approx.
(gal./liters) |
25/95 |
| Curb weight, estimated
(lbs./kg) |
4760/2159 |
Trailering
| NOTE: Additional equipment
required. See your dealer for further trailering information. |
| Trailer classification |
Light |
| Gross trailer weight, up to
(lbs./kg) |
2500/1134 |
| Maximum tongue
weight1 (lbs./kg) |
250/113 |
- 1 Maximum trailer weight ratings
are calculated assuming a base vehicle, except for any option(s) necessary to achieve
the rating, plus driver. The weight of other optional equipment, passengers and cargo
will reduce the maximum trailer weight your vehicle can tow. See your Chevy dealer for
additional details.
Braking
| |
U.S. Standard |
Metric |
| Front |
| Rotor size (dia. x
thick.) |
12.0 x 1.14 in. |
305 x 29mm |
| Total swept area |
207.8 sq. in. |
1340.4 sq. cm |
| Rear |
| Rotor size (dia. x
thick.) |
12.8 x .78 in. |
325 x 20mm |
| Total swept area |
216.6 sq. in. |
1397.2 sq. cm |
Engine
| |
LS2 6.0 Liter V8 |
| Type |
6.0 Liter V8 |
| RPO |
LS2 |
| Displacement (cu.
in./liters) |
364/6.0 |
| Bore & stroke (in.) |
4.0 x 3.6 |
| Bore & stroke (mm) |
101.2 x 92.0 |
| Compression ratio |
10.9:1 |
| Block material |
cast-aluminum |
| Cylinder head material |
cast-aluminum |
| Valves per cylinder |
2 |
| Ignition system |
direct, coil-near-plug |
| Hydraulic lifters |
hydraulic roller |
| Cam drive |
chain |
| Alternator rating (amps) |
145 |
| Battery (SAE rating,
cold-cranking amps) |
600 |
| Recommended unleaded fuel |
93 octane recommended but not required |
| Redline (RPM) |
6500 |
| Horsepower/kW @ engine RPM |
390/291 @ 6000 |
| Torque (lb.-ft./N-m) @ RPM |
405/546 @ 4400 |
Steering
| |
SSR |
| Type |
Hydraulically assisted rack-and-pinion |
| Ratio (overall) |
16.0:1 |
| Turns stop-to-stop |
3.0 |
| Turning diameter curb-to-curb
(ft./m) |
37.0/11.3 |
Transmission
| |
Hydra-Matic Heavy-Duty
electronically controlled four-speed automatic |
Tremec T-56 close-ratio six-speed manual |
| RPO |
M32 (4L65-E) |
M12 |
| Gear ratios |
| First gear |
3.06 |
2.66 |
| Second gear |
1.63 |
1.78 |
| Third gear |
1.00 |
1.30 |
| Fourth gear |
0.70 |
1.00 |
| Fifth gear |
– |
0.74 |
| Sixth gear |
– |
0.50 |
| Reverse |
2.29 |
2.90 |
| Converter size |
11.6/300 |
– |
| Fluid capacity
(quarts/liters) |
11.4/10.8 |
3.8/3.6 |
| Case material |
die-cast aluminum |
die-cast aluminum |
|
|
|
|
|